Cart
You have no items in your shopping cart
Sale-23%
Park Tool PCS-10.3
The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair.
C$409.99
C$314.50
Park Tool CCP-22
The CCP-22 uses a long, comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks.
C$34.99
Park Tool DT-1
The DT-1 from Park Tools is designed to perfectly machine the face of each tab, removing paint and material to create a flat surface.
C$200.00
Park Tool AWS-9.2
The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx® compatible driver into one convenient fold-up tool.
C$18.99
Park Tool BCB-4.2
A clean bike is a happy bike! The BCB-4.2 is a four-piece brush set made specifically to clean bicycles. Ergonomically designed with dual density, sure grip handles.
C$34.99
Park Tool BBT-22
For removing Shimano and ISIS Drive splined 20-tooth BB cups, also works on certain RaceFace, Truvative and FSA BB's.
C$39.99
Park Tool MT-10
The MT-10 is a high quality folding take-along tool that features forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation.
C$37.99
Park Tool CM-5.3
The Cyclone™ uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts.
C$44.99
Park Tool TS-2Di
A dial indicator bracket and set that measures a wheel’s lateral and radial run-out to .01mm.
C$265.99
Park Tool TS-2.2
The world’s most popular wheel truing stand and the standard of the bicycle industry for 35 years is now, more than ever, the stand to choose for daily shop use. The new TS-2.2 combines time-tested functions from the legendary TS-2 with new features to ma
C$553.99
Park Tool GSC-1
Park Tools GearClean Brush is perfect for cleaning the chain and derailleur. It also works a treat on your brakes and any other place where dirt accumulates.
C$7.99
Park Tool CWP-7
The universal design of the CWP-7 has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive™, Octalink®) crank arms. Also fits BNI cranks on Bosch® e-bikes. The CWP-7 is made for t
C$29.99
Park Tool BBT-5/FR-11 Cassette lockring tool
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.
C$16.99
Park Tool DF-1
Park Tool Dummy Fork DF-1 The DF-1 Dummy Fork is an essential companion for any scenario that requires dropping the fork from a bicycle, enabling complete removal of the fork while keeping the handlebars, headset spacers, and brake caliper organized.
C$79.99
Park Tool PRS-7-1
Easily mounted on any workbench. Uses the 100-5C adjustable linkage clamp. Clamp rotates 360-degrees. Mounting flange has four holes, allowing use of bolts or lag bolts to mount. Durable powder coated finish. Mounting bolts not included.
C$349.99
Park Tool FR-5.2H
A fast and convenient tool to remove and install 12-spline Shimano® / SRAM®-style cassette lockrings, as well as similar lockrings on rotor discs.
C$69.99
Park Tool BBT-27.2
Precision CNC machined aluminum tool for the installation and removal of 16-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive.
C$55.99
Park Tool ST-3 3-way socket wrenches: 8mm, 9mm, 10mm
The three most common bolt and nut sizes are combined with the classic Park Tool 3-way “Y” body. 8mm, 9mm, and 10mm forged CR-V steel sockets.
C$25.99
Park Tool FR-5.2
Designed for 12 spline 23.4mm diameter tool fittings - the most common tool fitting found on 7-12 speed cassette lockrings, and can also be found on some disc brake lockrings and Rock Shox® suspension fork top caps. Made from heat treated alloy tool steel
C$14.99
Park Tool SR-12.2
Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver.
C$49.99
Park Tool CT-3.3
The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets.
C$71.99
Park Tool CRP-2
The CRP-2 is a precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork.
C$499.99
Park Tool FR-1.3
12 splines, 22.6mm diameter fits Shimano®, Sachs® Aris, Sun Race®, DNP® Epoch and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles. Base of tool can be used with a 1" socket or wrench.
C$15.99
It seems everything was simpler in 1956 and bicycles were no exception. A common day of repairs consisted of a few flat tires, a broken spoke and possibly a coaster brake hub overhaul. As the 1960s arrived, so did calliper brakes, shifting systems, and lightweight components. One problem surfaced along with these complicated new parts. No tools! My father, Howard, and his business partner, Art Engstrom, were both "hands-on" guys, usually figuring problems out for themselves. Both were up to the challenge as they crafted their own problem-solvers. Most of these early tools were built from scratch with whatever materials and leftovers they could find.
One of the first time-savers they invented was a stand that held the bike off the ground allowing easy, back-saving access to any part of the bike. This original stand was put together using legs from a dining room table, an empty shell casing and a truck axle from a 37 Ford. As other shops, and eventually Schwinn Bicycle Company, saw the stand in action, requests were made for a production model. Park Tool Company was born!
The line grew quickly to include a wheel truing stand, more repair stands including a double-arm shop version wrenches gauges, fixtures and consumer tools soon joined the company's offerings. The retail side of the business also grew to earn Top Ten Schwinn dealer status fifteen years in a row including number one overall in 1977. In the early 1980s, all three retail shops were sold to concentrate on the tool business.
Our history says a lot about who we are and what we do. We still solve problems ourselves and we still insist on a "hands-on" philosophy of invention, testing, and production. The sixty employees of Park Tool take great pride in building the best bicycle tools in the world. Since that first stand, we've built hundreds of thousands more, reaching bike shops worldwide. Since the first-hand tool, we've built millions more and our line now includes over 400 different items and a recent history of fifteen to twenty new products introduced each year.
In April of 2013, we celebrated our 50th anniversary and moved into our fourth location, an 80,000 square foot facility built specifically for us. We're doing more manufacturing in-house than ever and our plans include expanding to do even more ourselves. The new facility also includes a photo and video studio so we can expand our web repair help articles and how-to videos. We're poised and ready for the next 50 years!
Howard and Art never imagined in 1963 that Park Tool Company would grow to what it is today, but we will not take our spot at the top for granted. Our pledge for the future is simple: Build the best tools. Our commitment to that principle is stronger than ever. We build bicycle tools and maintenance equipment, it's all we do and we're good at it. Thank you for choosing Park Tool. We're honoured to make tools for you.