Cart
You have no items in your shopping cart
Park Tool HXS-3
Shop quality, L-shaped, high-torque industrial steel hex wrenches with a ball end on the long arm and a standard end on the stubby arm, designed specifically for reaching bolt heads in tight spaces (like caliper mounting bolts, chainring bolts, etc.).
C$29.99
Park Tool DP-2
The DP-2 quickly installs to take the place of a bicycle pedal in order to make drivetrain adjustments with the pedals removed.
C$20.99
Park Tool DF-1
Park Tool Dummy Fork DF-1 The DF-1 Dummy Fork is an essential companion for any scenario that requires dropping the fork from a bicycle, enabling complete removal of the fork while keeping the handlebars, headset spacers, and brake caliper organized.
C$79.99
Park Tool PRS-7-1
Easily mounted on any workbench. Uses the 100-5C adjustable linkage clamp. Clamp rotates 360-degrees. Mounting flange has four holes, allowing use of bolts or lag bolts to mount. Durable powder coated finish. Mounting bolts not included.
C$349.99
Park Tool LRT-2
Designed and built to remove and install the lockring that retains front chainrings found on Shimano® STEPS® e-bike motors.
C$49.99
Park Tool BT-2
Commonly referred to as a “4th Hand,” the Park Tool Cable Stretcher pulls cables tight for adjustment of derailleurs and brakes. It features one-hand operation with a thumb lock to hold the cable tight while your hand is freed up to tighten bolts and nuts
C$71.99
Park Tool PP-1.2 Hydraulic brake piston press
The PP-1.2 makes hydraulic disc brake maintenance and repair faster and easier.
C$31.99
Park Tool MTC-10
The MTC-10 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation.
C$28.99
Park Tool IB-2
Strong, compact, and lightweight, the IB-2 is a great tool for taking on the road or trail. The IB-2 features our unique I-Beam handle with 10 tools.
C$29.99
Park Tool THT-1
Designed and built specifically for a wide variety of bicycle Torx® compatible work, the THT-1 is a set of eight common sizes of professional quality T-Handle star-shaped wrenches made for speed, efficiency, leverage and a perfect fit.
C$239.99
Park Tool FR-5.2
Designed for 12 spline 23.4mm diameter tool fittings - the most common tool fitting found on 7-12 speed cassette lockrings, and can also be found on some disc brake lockrings and Rock Shox® suspension fork top caps. Made from heat treated alloy tool steel
C$14.99
Park Tool SWB-15 3/8'' drive breaker bar
The 15" SWB-15 is a forged steel breaker bar with a 3/8" square drive head that pivots 180º. Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fasteners.
C$41.99
Park Tool CC-4
The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing wh
C$23.99
Park Tool BBT-47
Precision CNC machined dual-sided aluminum tool for the installation and removal of 12 and 16 external notch T47 and PF30 bottom brackets.
C$97.99
Park Tool CN-10
The CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing.
C$73.99
Park Tool AWS-9.2
The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx® compatible driver into one convenient fold-up tool.
C$18.99
Park Tool CBP-8
A complete tool set to work on both Campagnolo® and Fulcrum® Ultra-Torque™ and Power Torque™ crank and bottom bracket systems. The CBP-8 includes a beefed up bearing and crank puller and all the fittings necessary to remove and install both systems.
C$179.99
Park Tool BDT-2
The BDT-2 is a go/no-go style gauge designed to help set the proper tension on most belt drive systems and sizes. Also gauges rear cog parallelism and angularity.
C$95.99
Park Tool BDT-1
The BDT-1 solidly holds a belt drive rear sprocket (like a chain whip holds a chain drive cassette sprocket) so the nut or lockring can be removed.
C$79.99
Park Tool CRP-2
The CRP-2 is a precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork.
C$499.99
Park Tool BBT-90.3
The BBT-90.3 Press Fit Bottom Bracket Bearing Tool Set is designed for installation and removal of bearings and bearing units used in BB90, BB92, Shimano® press fit, SRAM® press fit GXP®, Race Face® press fit and other press fit bottom bracket systems usi
C$84.99
Park Tool HHP-2
Park Tool has the answer to your headset and cartridge cup pressing needs. The HHP-2 accurately aligns and presses 1", 1 ⅛", 1 ¼", and 1.5" headset cups.
C$307.99
Park Tool IR-1.2
The IR-1.2 speeds the internal frame routing of electric wires, shift cable / housing, brake cable / housing and hydraulic tubing on carbon fiber, titanium, and aluminum frames.
C$113.99
Park Tool SA-3
Once you try on this apron, there's no going back to standard aprons. A Park Tool logo makes the apron as good looking as it is functional (even when it's dirty).
C$49.99
It seems everything was simpler in 1956 and bicycles were no exception. A common day of repairs consisted of a few flat tires, a broken spoke and possibly a coaster brake hub overhaul. As the 1960s arrived, so did calliper brakes, shifting systems, and lightweight components. One problem surfaced along with these complicated new parts. No tools! My father, Howard, and his business partner, Art Engstrom, were both "hands-on" guys, usually figuring problems out for themselves. Both were up to the challenge as they crafted their own problem-solvers. Most of these early tools were built from scratch with whatever materials and leftovers they could find.
One of the first time-savers they invented was a stand that held the bike off the ground allowing easy, back-saving access to any part of the bike. This original stand was put together using legs from a dining room table, an empty shell casing and a truck axle from a 37 Ford. As other shops, and eventually Schwinn Bicycle Company, saw the stand in action, requests were made for a production model. Park Tool Company was born!
The line grew quickly to include a wheel truing stand, more repair stands including a double-arm shop version wrenches gauges, fixtures and consumer tools soon joined the company's offerings. The retail side of the business also grew to earn Top Ten Schwinn dealer status fifteen years in a row including number one overall in 1977. In the early 1980s, all three retail shops were sold to concentrate on the tool business.
Our history says a lot about who we are and what we do. We still solve problems ourselves and we still insist on a "hands-on" philosophy of invention, testing, and production. The sixty employees of Park Tool take great pride in building the best bicycle tools in the world. Since that first stand, we've built hundreds of thousands more, reaching bike shops worldwide. Since the first-hand tool, we've built millions more and our line now includes over 400 different items and a recent history of fifteen to twenty new products introduced each year.
In April of 2013, we celebrated our 50th anniversary and moved into our fourth location, an 80,000 square foot facility built specifically for us. We're doing more manufacturing in-house than ever and our plans include expanding to do even more ourselves. The new facility also includes a photo and video studio so we can expand our web repair help articles and how-to videos. We're poised and ready for the next 50 years!
Howard and Art never imagined in 1963 that Park Tool Company would grow to what it is today, but we will not take our spot at the top for granted. Our pledge for the future is simple: Build the best tools. Our commitment to that principle is stronger than ever. We build bicycle tools and maintenance equipment, it's all we do and we're good at it. Thank you for choosing Park Tool. We're honoured to make tools for you.